Network Technologies CS-16/8 Instrukcja Użytkownika Strona 39
- Strona / 79
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
34
Disconnect the administrator or a user with administrative privileges
Action (from Keypad) Reaction of SERIMUX
1. Press DISCON - The LED “Discon” will illuminate.
- The port 0 LED will be illuminated, the other port LEDs will be OFF.
2. Press ADMIN - The LED "Admin" will illuminate.
3. Press ENTER - If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate
together. They will turn OFF after 30 seconds or when any other key is pressed.
- The message: “Disconnecting administrator now” will be displayed by the terminal
application running on the former administrator port.
Login a user to the administrator main menu
Action (from Keypad) Reaction of SERIMUX
1. Press ADMIN - The LED “Admin” will illuminate. The port 0 LED will be illuminated, the other port LEDs will
be OFF.
2. Press PORT - The LED “Port” will illuminate.
3. Enter port number (00 by
default)
- The corresponding port LED will illuminate, the other port LEDs will be OFF.
4. Press USER - The LED “User” will illuminate.
5. Enter user number - The corresponding port LED will illuminate
6. Press ENTER - If the command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate
together. They will turn OFF after 30 seconds or when any other key is pressed.
- The administrator main menu (Figure 8, page 12) will be displayed on the terminal
application running on the administrator port.
The “Administrator main menu” will be displayed on the serial device connected to the specified port if:
– the administrator is not logged in;
– the specified user has administrative privileges, is enabled, and is not logged in;
– the specified port is accessible to the user;
– the specified port is not otherwise already connected and the port type is “User”.
Login user to a port
Action (from Keypad) Reaction of SERIMUX
1. Press USER - The LED “User” will illuminate.
- The port 0 LED will be illuminated, the other port LEDs will be OFF.
2. Enter the user number - The corresponding port LED will illuminate
3. Press PORT - The LED "Port" will illuminate
4. Enter the port number - The corresponding port LED will illuminate, the other port LEDs will be OFF.
5. Press ENTER - The User main menu will be displayed on the terminal application on the user port: (see
Figure 22 on page 27 )
- If the command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate
together. They will turn OFF after 30 seconds or when any other key is pressed.
The initial user screen will be displayed on the serial device connected to the specified port if:
– the specified user is enabled, and is not logged in at another port;
– the specified port is accessible to the user;
– the port is not otherwise already connected and the port type is “User”.
- SERIMUX-TERM-CS-16/8 1
- i 2
- TRADEMARK 2
- COPYRIGHT 2
- CHANGES 2
- TABLE OF CONTENTS 3
- TABLE OF FIGURES 5
- List of Tables 5
- INTRODUCTION 6
- Terminal Converter 6
- Console Switch 7
- MATERIALS 8
- FEATURES AND FUNCTIONS 9
- 1. INSTALLATION 10
- IEC Power Connector 11
- Powercord 11
- Monitor 12
- 2. GETTING STARTED 13
- 2.1 Setup The TERMINAL 13
- 2.2 Connect to the SERIMUX 14
- 3.1 Administrator Controls 17
- 3.1.2 Port List 18
- 3.1.3 Port Settings 19
- 3.1.3.1 Port serial settings 21
- 3.1.3.2 Modem settings 23
- 3.1.3.3 Port data buffer 24
- 3.1.4 User List 25
- 3.1.5 User Settings 26
- 3.1.5.1 Port access 27
- 3.1.5.2 Copy User Settings 27
- 3.1.6 Advanced Settings 28
- 3.1.6.2 Firmware 29
- 3.2. User Controls 31
- 3.2.2 User main menu 32
- 3.2.3 Port List screen 33
- 3.2.4 User Terse mode 34
- System Reset button 35
- 3.3 Firmware Upgrade 36
- Login the administrator 38
- Login user to a port 39
- Disconnect and logout a user 40
- Connect 2 host ports 40
- Disconnect 2 ports 41
- Attach or detach a modem 41
- 4. USING THE TERMINAL 42
- F3- Keybd SETUP Menu 44
- F4- Comm SETUP Menu 44
- F5- Misc SETUP Menu 45
- F6-Tabs SET-UP Menu 45
- F11- Colr2 Set-up Menu 47
- 4.3 Local Keyboard Commands 50
- 4.4 TERMINAL Command Guide 51
- Same 55
- page line col 55
- 4.5 ANSI Command Guide 62
- Redefine keys with string 67
- *3 CAN (CTRL X) Same 68
- 4.5.2 VT52 Command Guide 69
- Introduction 70
- 4.6.1 Basic Setup 70
- 4.6.2 Setup for LPD 71
- 4.6.3 LPD printing 72
- 4.6.4 Setup for TFTP 72
- 4.6.5 TFTP Printing 72
- 5. HARDWARE INFORMATION 73
- 5.4 Serial Port Cabling 74
- 5.5 Serial Port Pinouts 74
- 5.6 Cable Adapters 75
- SUB-D 25 77
- WARRANTY INFORMATION 79
Powiązane produkty i podręczniki dla Switche sieciowe Network Technologies CS-16/8
(38 strony)Philips F607770 manuály
Uživatelské manuály a uživatelské příručky pro Osvětlení Philips F607770.
Poskytujeme 1 manuály pdf Philips F607770 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Komentarze do niniejszej Instrukcji